Winder

Product Details

Single cantilever winding equipment
The motor adopts Japanese Yaskawa servo motor, PLC adopts Japanese imported KEYENCE, touch screen setting parameters, manual turntable tensioning mechanism (recommended with paper tube), each equipment system is independent, the equipment is highly interchangeable, and it can automatically rewind according to the speed of the extruder. And automatic wiring. When setting data, as long as the product line width is manually set, the equipment will install the set width automatic wiring. After the equipment is automatically started, it will enter the automatic state without personnel operation. Only when the required coil material is reached, the manual will Participate in manual unloading.

Winding technical parameters
1. Wire width 10-40mm
2. Wire thickness 1.0-3.0mm
3. Deformation tolerance from press exit to rewinding is ±0.05mm
4. Roll width 200-500mm
5. The inner diameter of the reel is 538mm
6. The fastest linear speed 100m/min
7. The maximum diameter of the coil is 1600 mm
8. The maximum mass of the reel is 600KG

Winding equipment parameters
Equipment voltage 380V
Total power of winding equipment 15KW