The operation process of the oven produced by Jiangsu Shangchen Machinery

1. Before use, you must pay attention to whether the power supply voltage is suitable. When in use, the grounding wire of the power socket must be grounded according to the rules.
2. When using electricity, do not touch the electrical part of the space on the left of the box with your hands or wipe it with a damp cloth and rinse with water. The power supply should be blocked during inspection.
3. The power cord cannot be wound around metal objects, and cannot be set in a low temperature or humid center to prevent the rubber from aging and causing leakage.
4. Do not overcrowd the items in the box, and leave a space for natural convection of the atmosphere so that the humid atmosphere can slow down and escape on the wind roof.
5. Check whether the silver contacts of the temperature scheduler are hairy or uneven. If so, you can sand the contacts with a fine gauze cloth before using them, and they should be cleaned with a clean cloth frequently to make them good in touch (note that you must Block the power supply). Do not hit the metal pipe of the indoor temperature controller to avoid affecting sensitivity.
6. Do not put flammable materials in a dry box without explosion-proof equipment.
7. After each use, the power supply must be blocked, and the surface and the inside of the box must always be clean.